12
“Movement is life!”
F. ADJUSTING THE POSITION OF THE HIP GUIDES
(ADDUCTORS) OR ARMRESTS/HIP GUIDES
Slotted adductor brackets should always be adjusted as far apart as
possible. This will allow the seat cushion to be properly installed.
Adductor pads can be adjusted to accommodate a wide range of
hip widths by adding or removing layers of 1/4” foam from the
pad cover. Extra wide adductor covers are available.
Figure 9: Adductor
Figure 10: Adductor/armrests
E. SHORT LEG DROP ADJUSTMENT—
For shorter leg length
adjustment, it is possible to mount the foot bed upside-down.
1. Remove pivot plate adjustment bolt [A] with a 3/16” hex wrench.
Using a 7/16” nut driver and 5/32” hex wrench remove foot bed
pivot bolt [B] (
Fig. 5
).
2. Using a 5/32” hex wrench, remove pivot plates [C] from footrest
extensions [D] (
Fig. 6
).
3. Flip pivot plates upside down and attach to opposite footrest exten-
sions making sure that T-nut in counter-bored hole is bolted to up-
per hole in footrest extension (
Fig. 7
).
4. Reinstall foot bed upside-down with pivot bolt through the lower
hole of the extension (
Fig. 8
).
5. Adjust desired leg drop, tighten leg length adjustment bolts. Rein-
stall pivot plate adjustment bolts.
Figure 6: Standard Leg Drop
Configuration
Figure 7: Short Leg Drop
Configuration
D
C
B
A
Figure 5: Footrest Assembly: Standard
Leg Drop
Figure 8: Footrest Assembly: Short Leg
Drop
