Kids Embrace Group 1,2,3 Car Seat, Инструкция по эксплуатации

Страница: 13 / 34

11
Thread the two shoulder strap retainers (V) through the side
slots and remove the shoulder harness.
Store all straps, connectors and buckles safely for future use.
To refit the harness, simply reverse the above process.
Lift the cover on the seat base, thread the crotch strap’s metal
retainer (U) down through slot (i) on the seat base and put the
seat cover back in place.
Unhook the shoulder straps at the rear of the seat shell by
sliding the straps through the slits in yoke (T).
Remove the shoulder straps, pulling them out from the front of the seat.
It is recommended that you use the 5-point harness for as long
as possible.
When your child has outgrown the group 1 (9-18kg) configuration
or you wish to use the seat for a child 15-25kg, then you will need to
convert the child car seat to group 2 mode.
You will need to remove the child car seat’s integral 5-point harness.
Press harness adjuster button (
I
) and pull up on the shoulder straps
(not the shoulder pads) to completely loosen the shoulder straps and
shorten the adjuster strap (J) as much as possible.
IMPORTANT: Do not pull the shoulder pads.
Converting for group 2 [15-25kg]
20
21
22
Turn the child seat over and thread the crotch strap retainer (U)
through the slot (ii)and remove the crotch strap.
23
24
Adjusting the harness height
(continued)
Thread the shoulder straps back through the seat at your
desired slot height, making sure you keep the shoulder straps
threaded through the shoulder pads and none of the straps
are twisted.
Once threaded through reconnect the shoulder straps to the yoke (T)
as above.
19