Tricks of the Trade: Getting
the spacer washer to align
properly between the BOW
and the FORK PLATE is the
trickiest and most
potentially frustrating few
minutes of your assembly.
That’s why there is a bonus
step is coming. But before
that, we can provide the
following tricks of the trade
–
Take a credit card or any
thin/firm material, align the
washer on the edge of the
FORK PLATE and push/align
the spacer over the hole.
When aligned, thread the
bolt with washer into the
hole and hand tighten.
Repeat for each FORK PLATE
hole.
Section I - ASSEMBLY
Step 3: Attaching the Fork Plate to the Forks
Attach the four FORK PLATE screw in the following,
“stack” ref spacing washer and
spacing nut washer.
Assembly and Tuning Guide - 2018
