52
26
Step 23: Attach Swings
A:
Insert flexible Swing Hanger Cover over hook. (fig. 23.1)
B:
Slide Swing Hanger Cover around hook until at top. (fig. 23.2)
C:
Hook swing rope onto hook. (fig. 23.3)
D:
Twist and flex Swing Hanger Cover onto open end of hook. (fig. 23.4)
Fig. 23.1
x 2 Belt swings
Other Parts
Fig. 23.2
Fig. 23.3
Fig. 23.4
2 x Belt Swing
4 x Swing Hanger Cover
A:
Connect the assembled Glider Swing to the Glider Hangers previously installed. (fig. 34.1)
B:
Attach 2 Belt Swings to the Bolt-Thru Swing Hangers. (fig. 34.1)
C:
Attach 1 Telescope to (1931) Post on the Monkey Ladder side with 2 (S2) #8 x 1-1/2” Wood Screws as
shown in fig. 34.1 and 34.2 and 34.3.
D:
Insert flexible Swing Hanger Cover over hook. (fig. 34.4)
E:
Slide Swing Hanger Cover around hook until at top. (fig. 34.5)
F:
Hook swing rope onto hook. (fig. 34.6)
G:
Twist and flex Swing Hanger Cover onto open end of hook. (fig. 34.7)
Use an extra
Flat Washer
If Bolt protrudes
beyond T-Nut
Warning! Check entire play centre for
bolts protruding beyond T-Nuts. Use
extra washers to eliminate this condition.
Step 34: Attach Accessories to Fort
Glider
Belt Swings
2 x Belt Swings
1 x Telescope
8 x Swing Hanger Cover
Other Parts
Fig. 34.1
Fig. 34.2
2 x
#8 x 1-1/2” Wood Screw
S2
1931
Hardware
Telescope
Telescope
Mount
S2
Fig. 34.3
Fig. 34.4
Fig. 34.5
Fig. 34.6
Fig. 34.7
26
Step 23: Attach Swings
A:
Insert flexible Swing Hanger Cover over hook. (fig. 23.1)
B:
Slide Swing Hanger Cover around hook until at top. (fig. 23.2)
C:
Hook swing rope onto hook. (fig. 23.3)
D:
Twist and flex Swing Hanger Cover onto open end of hook. (fig. 23.4)
Fig. 23.1
x 2 Belt swings
Other Parts
Fig. 23.2
Fig. 23.3
Fig. 23.4
2 x Belt Swing
4 x Swing Hanger Cover
