KIDDY phoenixfix pro 2, Инструкция по применению

Страница: 28 / 109

8
6. Semi-universal installation in vehicle with k-fix
Stick both guide funnels (U) onto the ISOFIX anchor fittings between the seat
and backrest of the vehicle seat (Fig. 13). The funnels (U) are available as
accessory and will help to increase the comfort while installation.
Now press the release button (S) (Fig. 14; Point 1).
The k-fix connectors (D) will now automatically extend from the back of the
seat (E).
Test whether the connector hooks are opened by pushing the two release
mechanisms (V) forward (Fig. 15).
When the lock indicators (W) do not show "green", the connector hooks are
open.
Place the kiddy phoenixfix pro 2 on a car seat that allows for semi-universal
installation (Section 5.3) and adjust the car seat if necessary as described in
Section 5.1.
Now push both k-fix connectors (D) onto the metal brackets (ISOFIX anchor
points) and press firmly against it so that the connectors (D) lock in place
(Fig. 16).
The correct locking will be confirmed by the "green" k-fix lock indica-
tor (W) (Fig. 17).
Test whether the k-fix connectors (D) are closed by jerking on the seat (E)
and check the left and right k-fix connector whether the lock indicator (W)
shows "green"!
As a final installation step you need to slide the child restraint system (A)
toward the backrest of the car seat.
Keep the release button (S) pressed in (Fig. 18; Point 1) while at the same
time pushing the seat (E) toward the backrest (Fig. 18; Point 2).
To secure your child in the seat fixed with k-fix, please proceed as described
in Section 7.
ENG