KIDDY GUARDIANFIX PRO 2 -, Инструкция по применению, Страница: 35 / 135

12
Make sure that all belts lie flat and are not twisted over each other.
Then tighten the shoulder belt (Fig. 26).
Prior to the trip, check to see that lap and shoulder belts are correctly
positioned on the impact shield (M), snug and not twisted. The belts must lie
flat over the belt guide area of the impact shield (Fig. 26+27). Examine the
belts periodically.
7.2 Securing the child in the age groups II – III (15 – 36 kg)
Use without an impact shield (M) is only allowed for children with a
body weight of at least 15kg (or from approx 4 years of age).
However, we recommend using the impact shield (M) until your child
weighs 18kg.
Always remove the seat cushion (K) for use without the impact shield (M).
Position your kiddy child safety seat on the car seat as described in section
5.1 – 5.2 respectively 5.1 + 5.3.
If you want to use it semi-universally (fixed with k-fix) please follow the
instructions from section 6.
Place the child in the seat and make sure that your kiddy has been adjusted
according to the child's body size (Section 4).
Take the following steps to secure your child with the vehicle’s own 3-point
belt:
Pull out the vehicle restraint and place the lap belt under both armrests (D)
of the seat (I) (Fig. 28).
Now close the belt buckle. Check to see whether the belt buckle is properly
locked in place (Fig. 28).
Tighten the lap belt and place the diagonal belt on the side of the belt
buckle under the armrests (D) (Fig. 29).
ENG