Kiddy Rides Peppa Pig Camper Van Скачать руководство пользователя страница 4

  

Northern Leisure/Kiddy Rides

 is a registered Inspection Body of 

ADIPS 

(the Amusement 

Device Inspection Procedure Scheme), conducting independent examinations and 
certification of children’s coin operated rides in accordance with guidance published by the 
Health and Safety Executive (HSE). By independent, we mean we are not linked to any 
particular manufacturer and will apply the guidance with equal diligence, regardless of the 
type of ride, or it’s manufacturer. Remember, our aim is to help you comply with the HSE 
guidelines. 
   Because of the young age of those who enjoy coin operated children’s rides (kiddie rides), 
safety should be of paramount importance to operators. There is surely a moral duty to 
safeguard the children that use our industry’s products. 
   Safety doesn’t just happen however, it requires commitment from manufacturers, operators 
and inspectors to ensure high standards. As an operator it is your duty to make yourself 
aware of safety requirements, especially as failure to comply can lead to injury to children, 
and furthermore, prosecution. By adopting a few simple procedures and having annual safety 
checks performed on your rides, you can show yourself to be conforming with HSE and Local 
Authority guidelines. Also you will gain peace of mind knowing that you have taken active 
steps to minimize the risks to young children who use your rides. 
   It is not always easy to find out exactly what is required of an operator. However there are 
strict guidelines laid down by 

BACTA

 (British Amusement and Catering Trade Association) 

entitled 

Kiddie Rides; A Safety Guide.

 It is produced by a committee of  

BACTA

 members, 

some of whom represent manufacturers of kiddie rides themselves. The guide is fully 
endorsed by the HSE. 
   In an attempt to highlight the importance of safety within the industry, 

ADIPS 

has been 

integrated into the 

BACTA 

guidelines. This initiative sets out procedures which must be 

observed by registered Inspection Bodies. Furthermore, 

ADIPS

 is unified with the HSE 

Fairground and Amusement Parks Code of Safe Practice. 

  To comply with this, a ride must undergo a thorough examination, and documentation must 
be issued, be retained, and be available for inspection by the Health and Safety Inspectorate 
and/or an officer of the Environmental Health Department of the     local authority. 
  Thorough examinations must be carried out at least every fourteen months (annual 
examinations are recommended).  
 Certification of rides by approved inspectors will give responsible operators within our 
industry the credibility they deserve. An 

ADIPS

 certificate is a badge of excellence, ensuring 

you have taken all the necessary steps to ensure danger risks are kept to a minimum. 
 In the past, inspections of children’s rides by the HSE appeared to be taking place in 
response to safety related incidents. However, this is changing rapidly, and it would appear 
random tests are under way. Inspectors requesting 

ADIPS

 documentation after a safety 

related incident is likely to become standard practice. 
  So, safety first. Don’t wait for an accident to happen before you consider the safety of your 
rides, get them 

ADIPS

 tested now. 

 
Call 

+44 (0) 113 2393803

           Email:

[email protected]

 

Safety Matters

Amusement Device
Inspection Procedures Scheme

2

 

Содержание Peppa Pig Camper Van

































Отзывы: