![background image](http://html1.mh-extra.com/html/kidde/p4010acsco-w/p4010acsco-w_user-manual_1965327015.webp)
15
•
A maximum of 24 Kidde Safety devices may be interconnected in a multiple station arrangement. The intercon-
nect system should not exceed the NFPA interconnect limit of 12 smoke alarms and/or 18 alarms total (smoke, CO,
Smoke/ CO Combination, heat, etc.). With 18 alarms interconnected, it is still possible to interconnect up to a total of
6 remote signaling devices and / or relay modules.
•
Maximum distance between wireless interconnect models is greater than 300 feet in open air.
9.1 Setting Up a Wireless Alarm Network
Creating an interconnected wireless alarm network is a simple process, with intelligent “self-enrollment” features, and
user-friendly voice prompts.
A.
reMoVe All deVICeS froM theIr PACkAgIng
b.
PoWer UP All deVICeS
•
Locate the red wheel on the back of the device. Turn the red wheel to the “ON” position on ALL devices using the
white tool included with the Quick Start Guide.
•
Once powered, the light rings will glow red and voice message will
announce, “Ready to connect. Follow Quick Start instructions.”
note:
If no further steps are taken within 15 minutes of initial power up, a
voice prompt, “No devices found, not connected” will be heard once, and the wireless function will turn off. The unit
will then perform as a stand alone alarm. See Section 9.3 for re-activating wireless.
Figure 9.1-B
ON
ACTIVATION
TOOL