Silhouette 120V AC Wire-in Low Profile
Carbon Monoxide Alarm with
Lithium-Ion Rechargeable Battery Backup
Part Number 21007426
Model KN-COPF-i
1016 Corporate Park Drive
Mebane NC 27302
1-800-880-6788
www.kidde.com
Architectural and Engineering
Specifications
The carbon monoxide alarm shall be Kidde Model KN-COPF-i or
approved equal. It shall be powered by 120VAC, 60Hz source and
include a sealed in, rechargeable, lithium-ion rechargeable battery
back-up. The temperature operating range shall be between 40°F
and 100°F (4°C and 38°C) and the humidity operating range shall
be up to 85% relative humidity (RH)
The unit’s CO sensor shall be electrochemical and shall meet
the sensitivity requirements of Underwriters Laboratories UL2034
Single and Multiple Station Carbon Monoxide Alarms. The unit
shall provide accuracy of +/-20% + 15 parts per million (ppm)
when reading CO concentration levels .
The alarm can be installed on the surface of any wall following
the UL/NFPA/Manufacturer’s recommended placement guidelines.
The alarm can be installed in most standard 2-gang, metal or
plastic electrical boxes.
A maximum of 24 Kidde devices can be interconnected in a
multiple station arrangement. The interconnect system must not
exceed the NFPA (National Fire Protection Association) limit of
18 initiating devices, of which 12 can be smoke alarms. With 18
initiating devices (smoke, heat, CO, etc), interconnected, it is still
possible to interconnect 6 strobe lights and or relay modules.
The unit shall incorporate a digital display that meets the sensi-
tivity requirements of UL 2034. The display will identify the levels
of CO in parts per million (ppm) once that level reaches 30ppm
(i.e.: “abnormal” levels).
The alarm shall include a test button that will electronically
simulate the presence of CO and cause the unit to alarm. This
sequence tests the unit’s electronics and horn to ensure proper
operation. In accordance with UL 2034 with requirements, the CO
sensor will not alarm to levels of CO below 30 ppm and will alarm
in the following time range when exposed to the corresponding
levels of CO.
70 ppm CO Concentration 60 – 240 minutes
150 ppm CO Concentration 10 – 50 minutes
400 ppm CO Concentration 4 – 15 minutes
The alarm shall utilize a piezoelectric horn that is rated at 85
decibels at 10 feet. When the unit detects carbon monoxide, the
alarm pattern will be four (4) short beeps - followed by five (5)
seconds of silence - followed by four (4) short beeps. The unit
shall incorporate an “Intelligent Interconnect” feature that allows
it to respond to a smoke incident when interconnected with
smoke alarms. During a smoke incident, the horn will sound in the
required, repetitive manner for a smoke alarm – three (3) beeps, a
pause, three (3) beeps, a pause. The digital display will also scroll
the word “Fire” across the display. The unit shall incorporate 3
Technical Specifications
Part Number:
900-0232
Model:
KN-COPF-i
Power Source:
120VAC, 60HZ, 60mA max
Sealed-in, rechargeable,
lithium-ion battery back-up
Sensor:
Electrochemical
Audio Alarm:
85dB at 10ft
Temperature Range:
40˚F (4.4˚C) to 100˚F (37.8˚C)
Humidity Range:
up to 85% relative humidity (RH)
Size:
4.83” x 4.76” x 1.49 “
Weight:
.62 lbs with battery
Wiring:
Quick connect plug with 8” pigtails
Interconnects:
Yes
Warranty:
7 year limited
Ordering Information
UPC:
0-47871-07426-6
4.83
4.76
DEPTH
0.71
FROM WALL
0.78
MAX DEPTH
INTO ELECTRICAL BOX
**Not for sale by individual unit - information for dimensional purposes only.
P/N: KL-SIL-CO sheet
rev. 01-2009
Distributed by:
LED’s. A green LED will be steady on when AC power is present.
A red LED will flash in unison with the sounder pattern for both a smoke
or CO incident, or an error condition. The amber LED will illuminate if
that unit is the originating alarm in a CO incident.
The unit shall include a peak level memory feature that will store the
peak CO level sensed since the unit was last reset. The peak CO level
stored in the unit’s memory shall be displayed (in ppm) on the digital
display by pressing the appropriate button on the unit. The memory
shall also be capable of being reset.
The unit shall be Listed to UL 2034. It shall also include a 7-year
manufacturer’s limited warranty.
Part
Dimensions
Case/
Skid
Number
I 2 of 5
Pack Quantity
(w x d x h inches)
Weight
Skid
Weight
900-0232**
N/A
Individual (Box)
5 x 1 7/8 x 5
1 lb.
N/A
N/A
21007426
100-47871-07426-3
Cutcase (6 units)
5.25 X 12.5 X 5.25
7lbs
196
1,372 lbs.
