background image

1394 South Third Street, Mebane NC 27302
1-800-880-6788  •  www.kiddeus.com

AC Powered, Plug-In
Carbon Monoxide Alarm

Part Number 900-0056
Unit Number KN-COP-DP

Architectural and Engineering
Specifications

The carbon monoxide alarm shall be Kidde Unit Number KN-COP-
DP (part number 900-0056) or approved equal.  It shall be powered
by a 120VAC, 60 Hz source.  The temperature operating range shall
be between 40˚F and 100˚F (4˚C and 38˚C) and the humidity opera-
tion range shall be 5% - 95% relative humidity.

The CO sensor shall be of a fuel cell design and shall meet the

sensitivity requirements of Underwriters Laboratories UL 2034 Single
Station Carbon Monoxide Detectors.  The unit shall provide accura-
cy of +/-20% + 15 parts per million (ppm) when reading CO con-
centration levels.

The alarm shall include an attached plug that can be installed 

in any outlet following the UL/NFPA/Manufacturer’s recommended
guidelines.  The plug shall be capable of being rotated so the alarm
remains vertical independent of whether the electrical socket is
mounted vertically or horizontally. 

The unit shall incorporate a digital display that meets the sensi-

tivity requirements of UL 2034.  The display will identify the levels of
CO in parts per million (ppm) once that level reaches 30ppm (i.e.:
“abnormal” levels).  The display will have a red dot in the lower
right corner that will blink to indicate the normal operation.

The alarm shall include a test button that will electronically 

simulate the presence of CO and cause the unit to go into alarm.
This sequence tests the unit’s electronics to ensure proper operation.

The CO sensor will not alarm to levels of CO below 30 ppm

and will alarm in the following time range when exposed to the
corresponding level of CO.

The alarm shall include a piezoelectric horn that is rated at 85

decibels at 10 feet.  When the unit detects carbon monoxide, the
alarm pattern will be four (4) short beeps – followed by five (5) 
seconds of silence – followed by four (4) short beeps.  A number
reading will appear on the digital display identifying the CO 
concentration (in ppm).

The unit shall include a peak level memory feature that will

store the peak CO level sensed since the unit was last reset.  The
peak CO level stored in the unit’s memory shall be displayed (in
ppm) on the digital display by pressing the appropriate button 
on the unit.  The memory shall also be capable of being reset.

The unit shall be listed to UL 2034.  It shall also include a 5-year

manufacturer’s limited warranty.

Technical Specifications

Part Number:

900-0056

Unit Number:

KN-COP-DP

UPC Number:

7-84608-00560-1

Power Source:

120VAC

Sensor:

Electrochemical

Audio Alarm:

85dB at 10ft

Temperature Range: 40˚F (4.4˚C) to 100˚F (37.8˚C)

Humidity Range:

Up to 95% relative humidity (RH)

Size:

5.65”L  x  3.25”W  x 1.9”H

Weight:

1lb

Interconnects:

No

Wiring:

Plug-In

LED:

Displays CO concentration in PPM

Warranty:

5 year limited

*Based on accuracy claims of major manufacturers

UNIT

MASTER PACK

CUT CASE

POWER TOWER

1

PDQ

2

4

12

36

Ordering Information

Clam Shell UPC:

7-84908-00560-1

Part

Dimensions

Case/

Layers/

Skid

Number

I 2 of 5

Pack Quantity 

(w x d x h inches)

Weight

Skid

Skid

Weight

900-0056**

N/A

Individual

7 x 2.5 x 10.75

1lb

N/A

N/A

N/A

900-0056-02

107 84908 00560 8

PDQ (2 units)

7.75 x 6 x 11.75

2lbs

105

3

210lbs

900-0056-07

207 84908 00560 5

Master Pack (4 units)

7.75 x 11.5 x 12

4lbs

80

4

320lbs

900-0056-012

307 84908 00560 2

Cut Case (12 units)

15 x 18 x 12

12lbs

18

3

216lbs

900-0056-036

407 84908 00560 9

Power Tower (36 units)

20 x 24 x 50 (incl. pallet)

36lbs

3

3

108lbs

**Not for sale by individual unit

3.25"

1.9"

5.65"

Distributed by:

Отзывы: