6
3. Troubleshooting Guide
NOTE: If at any time your alarm fails to operate correctly (erratic or low sound, for example), or if you require further
information, please contact customer support at 0800 917 0722.
Trouble Condition Visual Indications
Audible Indications
Action:
Low Battery
Amber LED blinks every
60 sec.
Model K10LLDCO digital
display will show “Lb”.
Chirp every 60 sec.
* Push test button once to silence for 24 hrs.
Note: 30 days after Low Battery begins, the
* If the unit is cold, allow the unit to warm up
for a couple of hours.
* Remove, discharge, dispose unit, and replace
as soon as possible.
Fault Mode
Amber LED blinks every
30 sec.
Model K10LLDCO digital
display will show “Err”.
Chirp every 30 sec.
* See Cleaning Your Alarm section.
* Push test button once to attempt to reset
the unit.
End of Unit Life
Amber LED blinks twice
every 60 sec.
Model K10LLDCO digital
display will show “End”.
Two chirps every
60 sec.
* Push button once to silence for 24 hrs.
Note: 30 days after End of Unit Life begins, the
* Remove, discharge, dispose unit, and replace
as soon as possible.
MCU Failure
None.
Constant tone.
* Remove, discharge, dispose unit, and replace
as soon as possible.
Stuck Button
Amber LED blinks
every 5 sec.
Chirp every 5 sec.
* Push button to dislodge it from being stuck. If
button cannot be unstuck, remove, discharge,
dispose unit, and replace as soon as possible.
3. Troubleshooting Guide
