Tamper Resist Feature
To make your smoke/CO alarm tamper resistant, a tamper resist
feature has been provided. Activate the tamper resist feature by
breaking off the four posts in the square holes in the trim ring (see
figure 4A). When the posts are broken off, the tamper resist tab on
the base is allowed to engage the mounting bracket. Rotate the
alarm onto the mounting bracket until you hear the tamper resist
tab snap into place, locking the alarm on the mounting bracket.
Using the tamper resist feature will help deter children and others
from removing the alarm from bracket. NOTE: To remove the alarm
when the tamper resist tab is engaged, press down on the tamper
resist tab, and rotate the alarm off of the bracket (see figure 4B).
19
A
A
Posts
FIGURE 4A
FIGURE 4B
Operating and Installation Instructions