When you first power up the alarm:
The alarm will sound briefly,
then the green Operate LED will light. This indicates that the CO alarm is
receiving power and that the alarm circuit is functioning.
Within a few minutes, your carbon monoxide alarm will start monitoring
for CO and will continue to do so as long as it receives power or the
end of life function is activated.
6. Operating Characteristics
How to Install Your Alarm
Direct Plug Alarm To install:
1. Choose a standard 120 V unswitched outlet
to plug the alarm into.
2. Write the date ten years from installation on
the Replace by sticker
on the CO alarm.
3. If outlet is mounted
sideways, (horizontally)
rotate the AC blades.
4. If desired, activate the
Tamper Resist Switch
by moving the Tamper
Resist Disable Slide to
the “ON” position. The Tamper Resist feature signals a loud 85 dB
alarm should the unit become unplugged or loose from the outlet.
(See Tamper Resist Feature details in the Product Features and
Specifications section.)
5. Pull the yellow tab to activate the battery backup.
6. Plug the alarm into the outlet.
4. Installation Instructions
5. Alarm Characteristics
Carbon Monoxide Alarm Indicator
When the alarm senses a dangerous level of CO, the unit will emit a
loud alarm pattern. The alarm pattern is 4 quick beeps followed by
5 seconds of silence. This cycle repeats as long as a dangerous CO
conditions exist. The red Alarm LED will flash the same pattern.
WARNING:
This model will stay in alarm on battery operation as
long as dangerous CO condition exists
Tamper-Resist
Activate Slide
Tamper-Resist
Activation Switch
90º ROTATING
DIRECT PLUG
