• Permanent independent smoke and carbon monoxide
sensors.
•
Smoke alarm takes precedence
when
both
fire and
carbon monoxide are present.
• Alarm/Voice message warning system that alerts you of the
following conditions in the manner described below, thus
eliminating any confusion over which alarm is sounding:
FIRE:
The alarm/voice pattern is three long alarm beeps
followed by the verbal warning message “FIRE! FIRE!”.
This pattern is repeated until the smoke is eliminated. The
red LED light will flash while in alarm/voice mode.
CARBON MONOXIDE:
The alarm/voice pattern is four
short alarm beeps followed by the verbal warning message
“WARNING! CARBON MONOXIDE!” After four
minutes the alarm/voice pattern will sound
once every
minute
until the unit is reset, or the CO eliminated. The
red Light Emitting Diode (LED) light will flash while in
alarm/voice mode.
LOW BATTERY:
When the batteries are low and need
replacing the red LED light will flash and the unit will
“chirp” one time, followed by the warning message “LOW
BATTERY.” This cycle will occur once every minute for
the first hour. After the first hour the red LED light will
continue to flash every minute accompanied by the
“chirp” only sound
. The voice message “LOW
BATTERY” will sound once every fifteen minutes during
the “chirp” only cycle. This will continue for at least seven
days.
Features
4