6
7
Assembly:
Install the front and back wheels
❷
❸
❶
❶ Make the wire connections.
• Attach the wires coming
from the rear wheel
assembly to the wires
coming from the truck
electrical board
❷ Attach the wheel assembly.
• Place the wheel assembly
over the rear inset of the
truck body aligning the
holes in the wheel
assembly with the holes
on the truck
• Fasten with six screws
❸ Attach the front wheels.
• Insert a washer and wheel
onto the end of each axle
• Insert a washer over the
end of each axle
• Insert the end of the
cotter pin through the
hole at the end of axle
until they snap into place
• Press the tabs of the
hubcaps into the slots of
the wheel until they snap
into place
Working from the underside of the truck, perform the following steps:
