Maintenance
The
Kid Trax
Motrocycle should be checked for damage, missing or badly
worn parts before use.
•
Check the tightness of the fasteners before each use.
•
Ensure the battery is securely in place before use
•
Occasionally use lightweight oil to lubricate moving parts such as
wheels and steering linkage. Do not use oil on plastic or nylon parts.
No lubrication is required.
•
Store the vehicle indoors or cover it with a tarp to protect it from the wet
weather. Keep it away from sources of heat, such as stoves and heaters.
•
Clean the vehicle with a soft, dry cloth. To restore shine to plastic
parts, use a non-wax furniture polish. Do not use car wax, abrasive
cleaners or wash the vehicle with soap and water. Water will damage
the motor, electrical system and battery.
•
Kid Trax Toys recommends that you take the vehicle to an authorized
service center for periodic maintenance and service. Call Kid Trax Toys
Consumer Relations at
877-741-6154
for an authorized service center.
16
FCC Information
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions (1) this device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the distance between the equipment and the receiver.
•
Consult dealer or an experienced radio/TV technician for help.
•
•
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
Caution: Changes or
not expressly approved by the party
responsible for compliance could void the user’s authority to operate
the equipment.
Check the state or local requirementsfor the product before using the
product.
Содержание KT1058WM
Страница 9: ...6 1 2 3 6 8 7 ...
