KID Trax Dodge Charger, Руководство пользователя

Страница: 12 / 36

1
Gear box
Install the Rear Wheels
(in clear poly bags)
1. Locate a rear wheel (marked “Rear” with gear-shaped protrusion).
2. Slide the wheel onto the axle with protrusion facing toward vehicle.
3. Fit the gear shaped protrusion into the gear box.
4. Align the three locating pins on the inside of the wheel cover into
the wheel holes, and push the wheel cover into place.
5. Slide a small washer onto the axle.
6. Attach nut onto the axle. Using the Nut Wench, tighten snugly until
you can see about two threads on the axle. Do not over tighten.
7. Align the pins in the hubcap with the holes in the wheel cover.
Press the hubcap into place. Note: Do not use a hammer.
8. Repeat steps 1-4 to attach the other rear wheel.
Side marked
“Rear” with
gear-shaped
protrusion
Back-side of
hubcap with
Locating pins
Rear wheel
2
Wheel cover
4
Small washer
5
Nut
6
Hubcap
7
3
Hubcap
pins
Wheel cover
holes
Wheel holes
8
Axle