❶ Remove the seat, as described on
page 11. Figure 4.1
❷ Disconnect the red connectors.
❸ Plug the charger connector into the
red connector from the battery.
Important!: Only use the Kid Trax
Toys charger included with the Quad
(Input: AC 120V–, 0.2A, 60Hz Output:
DC 7V, 0.8A).
❹ Plug the charger into a standard
120V wall outlet. Note: The charger
may feel warm during charging. This
is normal and not a cause for
concern.
❺ After charging is complete (at least
12 hours, but no more than 18)
unplug the charger from the wall
outlet.
❻ Unplug the charger from the
charging connector and connect the
battery connectors.
❼ Place the seat back on the vehicle,
and lock into place.
First charge
12 hours. Do not charge more than 18 hours
Normal charge
12 hours. Do not charge for more than 18 hours
CHARGE THE BATTERY
Important! Before using the quad for the first time the battery needs to be charged
for at least 12 hours . Only an adult who has read and understands the safety
warnings should handle, charge or recharge of the battery.
12
4
Using the Minnie Quad
Figure 4.1
Close
Open
1
4
2
3
