4
Attach Rear Wheels
1. Locate a wheel marked “REAR”.
Slide a wheel onto the axle with
“REAR” facing toward vehicle.
Fit the protruding section of the
wheel into the gear box.
NOTE:
For the rear wheels,
a large washer is not needed
before sliding a wheel onto
the axle.
Then slide a wheel cover
onto the axle, fitting the three
locating pins into the holes.
2. Slide a small washer onto
the axle.
Attach a nut onto the axle and
tighten snugly with the nut
wrench until you can see about
two threads on the axle. Do not
overtighten.
3. Align the pins in the hubcap
with the holes in the wheel
core. Press hubcap into place.
NOTE:
Do not use a hammer.
Repeat steps 1-3 to attach the
other rear wheel.
1
2
2a
3
