KID MOTORZ BMW M6 GT3 1207, Руководство пользователя

Страница: 13 / 19

Operating Your Vehicle
Main functions:
1) There are remote controllable and pedal switch buttons.
2) Rear drive: Power motor gearbox provides powerful "front or rear" power.
3) Forward / backward function: There are three forward speed level, neutral gear and reverse gear on right side of the panel (each gear
has its own LED display)
4) Foot pedal function: Press the foot pedal button, when the gear shifter is in forward or backward position, step down the foot pedal to
move the car forward or backward, and release the foot pedal to stop the car.
5) Charging protection function: All functions needing to be powered by the battery will fail when the battery is being charged.
6) Forward / backward brake function: It has relay brake function whether it is moving forward or moving backward or parking.
7) Turn the auxiliary pull wheel at the bottom of the car out, and turn the pull handle at the front bottom of the car out to pull it away.
①
Press this button to turn on the main power, and the system is in
standby mode, and the trumpet gives a sound of engine. Red light of
one button start button and green light of foot switch mode button will
be on, displaying “00.00” with "V", and the normal voltage will be
displayed after the engine sound; then the English prompt sound of
"music player" music is played, and the music button will be invalid
until the prompt sound is over.
②
After pressing this button for 2 seconds, the main power will be cut off
and the system will be shut down.
One-button start button:
①
In MUSIC USB BT mode: short press this button, the green light of this
button will be on for a short period of time and it will change to the
previous music; long press this button for 2 seconds without release,
the green light of this button will be on, the volume will be
decremented, the volume value on display will decrease from U30 to
U00.
②
Each time of starting, the default volume value will be U25.
Under MUSIC play mode, press this button to play a song, and the
green light of this button is on; press this button again to play the
next song; there are 2 music buttons, each button will play 3 songs
repeatedly.
Music button:
Previous \ Volume- button:
①
In MUSIC USB BT mode: short press this button, the green light of this
button will be on for a short period of time and it will change to the next
music; long press this button for 2 seconds without releasing, the
green light of this button will be on; the volume will increase and the
volume value on the display will be displayed incrementally from U00
to U30.
②
Each time of starting, the default volume value will be U25.
Next music \ button:
The start button is in “off” mode by default, press once to turn on the light,
and the green light will be on; press again to turn on the fan, and the light
will be off; press the button for the third time to turn on both the light and
fan; press the button for the fourth time to turn off both the light and fan,
and at the same time, the green light of this button will be off.
Light / fan button:
When this button is pressed, the system will switch to the remote control
mode, and the green light will be on, then the remote controller can be
used to drive the car.(At this time, stepping on the accelerator pedal is
functionless!)
Remote control button:
①
It is by default in the foot switch mode, and the green light of this
button will be on; then turn on the gear, and step on the pedal switch
to start and loose the pedal switch to slow down the car; press the
remote control button to stop the car forcefully. (The car can’t be
started by foot switch when it is stopped by the remote controller!)
②
Safety protection function: Before starting the car by stepping on the
accelerator or switching from the remote control mode to the
footswitch mode, you must first loosen the accelerator pedal and then
step on it.
Foot switch button:
①
It is by default the built-in music play mode, and there is "music
player" English prompt sound, and the display "MUSIC" will be
always on;
②
Press this button and switch to USB mode, and there is "USB
mode" English prompt, and "USB" on display will flash (Flash
when USB is not connected, and it will be always on when it is
connected to USB);
③
Press this button again and switch to BT Bluetooth mode, and
there is "bluetooth mode" English prompt, "BT" on display will
flash (Flash when Bluetooth is not connected, and it will be
always on when Bluetooth is connected);
④
Press this button again and switch back to the built-in music
playback mode.
①
The middle four digits display the voltage of the battery in real
time; it will display the volume change in adjusting the volume
(U00-U30); which song (0001-9999) in USB music will be
displayed during USB playback.
②
The function icons on both sides of the display are “MUSIC, MP3,
V, , ”, and the mode or state in which it lies will be displayed
by its corresponding icon.
Display function:
Mode switch button:
USB playback function:
In USB mode, after connecting USB, the “USB” on the display will
be always on, and then the audio file in USB can be played.
Bluetooth playback function:
①
In Bluetooth mode, after connecting Bluetooth, the “BT” on
display will be always on, and then the audio file in the Bluetooth
device can be played.
②
When Bluetooth is disconnected, there is a “dingding” prompt
tone, and “BT” on display will flash.
③
Name of Bluetooth: CHILOKBO
MUSIC
V
USB
BT
USB
Music
Light / fan
Music
Previous music
volume (-)
Voltage display
Remote control
Foot switch
Mode switch
USB interface
Next music
volume (+)
One button start (main switch)
Press Press
Turn on
the fan
(Turn off
the light)
Turn on
both the
light
And the fan
Loop)
(It will be
as such
Press Press
Turn on
the light
Turn off
both the
light
And the fan
(It will be
as such
Press
USB mode
Press Press
BT mode Music mode Loop)
USB
Operating Y
our Vehicle I
12