6
ZK
150
DIGITAL
STEREO
SYSTEM
with ALARM
USING THE ALARMS
• Tap the
alarm1
or
alarm2
button to turn each alarm on and off.
• Use the quickstart on page 5 for instructions on how to set an alarm.
• You can set the alarm source to DOCK, FM1, FM2, AM, or buzzer.
• When an alarm goes off, hit the
SNOOZE
button to silence the alarm for 9 minutes.
• Before setting the alarm, play music on your Zune device and press pause.
• Turn off your Zune device’s wireless sync function if the alarm source is set to DOCK.
USING THE RADIO
To improve FM/AM radio reception, connect the included FM antenna to the coaxial jack on the rear of
the ZK150 and/or the included AM Loop antenna to the AM terminals on the rear of the ZK150. You may
need to experiment with antenna angle/position for optimal reception.
• Source to FM1, FM2, or AM (see page 5 for instructions).
• Tap the navigation knob to display radio station; rotate the knob to adjust radio frequency.
• Use the and buttons to seek to the next strongest station.
• Store the current station in memory by holding any of the
m1
–
m4
buttons.
• Recall a stored station by tapping the
m1
–
m4
memory button to which it is assigned.
• Tap the
SNOOZE
button to mute/unmute.
Setting the Radio Region
1. Press
setup
then
source
within one second.
2. Rotate the navigation knob to select between Region 1 and 2.
3. Press the navigation knob to save.
Region 1: All countries except North America and the Caribbean
Region 2: North America (USA & Canada) and the Caribbean
USING YOUR ZUNE DEVICE WITH THE ZK150
• Insert your Zune device into the ZK150 dock before turning on the ZK150.
• Installing the included isolation bracket will provide a more secure fi t for your Zune device
and reduce vibration.
• Tap the
SNOOZE
button to mute/unmute.
2009 ZK150 Multilingual i01.indd 6
2009 ZK150 Multilingual i01.indd 6
6/23/2009 11:51:14 AM
6/23/2009 11:51:14 AM