2
KMW10 Subwoofer
Owner’s Manual
INSTALLATION
Wiring:
Carefully place the speaker wire in a location that is clear of standing water and moving
components of the boat. The terminal cover is removable for wiring installation and, when locked
in place, it aids in ignition protection. Connect the speaker wire to the speaker terminals. Loop the
positive and negative wires into the pocket in the cover, then together and through the slot.
Authorized KICKER Dealer:
Purchase Date:
Speaker Serial Number:
Remove Terminal Cover
Route wire through
Terminal Cover Slot
Terminal Cover Pocket
Connect wire to terminals
MODEL:
KMW10
Rated Impedance [Ω]
2 or 4
Fs [Hz]
32
Sensitivity [1W, 1m]
86.5 dB
Qts
0.550
Qms
14.361
Qes
0.580
Re [2Ω, 4Ω]
1.89, 3.6
Vas [ft³, L]
1.65, 46.6
Continuous Power Handling [Watts RMS]
150
Outer Frame Dimension [in, cm]
11-1/8, 28.3
Mounting Depth [in, cm]
5, 12.7
Mounting Hole Diameter [in, cm]
9-1/4, 23.5
Frequency Response [Hz]
30 - 500
2014 KM Sub Rev C.indd 2
2014 KM Sub Rev C.indd 2
11/6/2013 3:58:17 PM
11/6/2013 3:58:17 PM