Kicker KMC5, Руководство пользователя

Страница: 13 / 21

12
Audio Settings
Hold the MENU button for 2 seconds from a source screen to enter the audio settings menu. Press the MENU button to enter the
audio settings. The available audio settings are: Bass, Treble, Balance, Fader, and EQ. Use the VOLUME KNOB to change the
available values for each setting.
Sub - adjust the subwoofer level from 0–+12 Bass - adjust the bass level from -6–+6
Mid - adjust the mid level from -6–+6 Treble - adjust the treble level from -6–+6
Balance - adjust the balance from Left 6 to Right 6 Fader - adjust the fader from Front 6 to Rear 6
EQ - select between EQ presets:OFF, ROCK, POP, JAZZ and CUSTOM
When Custom EQ is selected, press the MENU button to enter custom frequency adjustments for 50Hz, 125Hz, 250Hz, 500Hz, 1kHz,
3kHz, and 8kHz. To manually adjust Bass, Mid, and Treble, EQ must be set to OFF .
SiriusXM
After installating your SiriusXM Connect Tuner and antenna, power on the KMC5 and select SiriusXM as the input source. Channel 1,
the SiriusXM preview channel, should be audible. If it is not, please refer back to the installation instructions for your SiriusXM Connect
Tuner. If the preview channel is working, tune to Channel 0 to fi nd the Radio ID of your tuner, or locate the Radio ID on the bottom of the
SiriusXM Connect Tuner.
In the USA, you can activate online or by calling SiriusXM Listener care:
Visit www.siriusxm.com/activatenow
Call SiriusXM Listener Care at 1-866-635-2349
For Canadian Subscriptions, please contact:
Visit www.siriusxm.ca/activatexm
Call XM customer Care at 1-877-438-9677
When the KMC5 detects that the SiriusXM Connect Tuner has received activation, it will display “Subscription Updated”. The activation
process can take up to an hour to complete. The KMC5 must be powered on and receiving the SiriusXM signal to receive the activation
message.