14
Step 4:
If your wiring is dual core, separate
approximately 30cm of the two wires.
Note: You may need to remove the 30cm
of the outer layer of insulation if your wire
is double insulated
Step 5:
Strip approx 1cm of insulation from
each cable using a wire stripper, select and
crimp the appropriate sized spade terminal
to your positive wire and the ring terminal
to the negative wire. Note: Check with the
manufacturer of your accessory to
determine which wire is positive and which
is negative crimping terminals.
Step 6:
Connect the spade terminal to the bottom blank tab on your switch and using a
phillips head screwdriver, connect the negative ring terminal to one of the spare screw
positions on the negative bus bar.
30cm
1cm
Step 8:
Tuck cables neatly under the control hub and carefully close the lid, returning the
4 screws to secure the control hub down
Содержание CONTROL HUB
Страница 1: ...USER MANUAL CONTROL HUB VER 0 15 WITH DCDC CHARGER WITHOUT DCDC CHARGER ...
Страница 5: ...3 SWITCH LABELS FUSE BOX LABELS ...
Страница 12: ...10 FUSE BOX 6x Fuse Box with Two Spares Ÿ Prewired for simplicity Ÿ Two spares included Ÿ Blown fuse indicator ...
Страница 31: ...29 TECHNICAL DIAGRAM ...