Fig. 3
4. INSTAL=LING THE LIGHT BULB &
GLASS SHADES
1. Attach the wire connector from the
transformer to the florescent lamp. Now attach
the lamp to the lamp holders applying even
pressure to the lamp at each lamp holder. The
lamp will pop into place.
NOTE:
Sometimes it
helps to open the lamp holder by lifting the
end. This enlarges the holder allowing the
lamp to pop into place easier.
2. Insert the beaded pull chain through the
hole in the glass shade. Now place the glass
shade over the light kit stem. Secure the
shade with a lock washer and metal nut
(rubber side touching the shade). (Fig. 3)
3. Now slip the beaded pull chain into the hole
on the side of the decorative glass cap an
place the cap onto the light kit stem. Feed the
beaded pull chain from the light kit stem
through the hold in the decorative nut and
thread the decorative nut on securely. DO
NOT OVER TIGHTEN.
4. Your installation is now complete. Restore
electrical power and enjoy your new ceiling fan
light kit.
Light kit
assembly
Glass
shade
Glass cap
Metal nut
Lock washer
Decorative nut
Pull chains
Wire connector
Lamp
Lamp holder
3
