52" Compass LED | 9
ELECTRICAL CONNECTIONS
WARNING:
WARNING: To avoid possible electrical shock, be sure you have turned off
To avoid possible electrical shock, be sure you have turned off
the power at the main circuit panel before wiring. Follow the steps below
the power at the main circuit panel before wiring. Follow the steps below
to connect the fan to your household wiring. Use the wire connecting nuts
to connect the fan to your household wiring. Use the wire connecting nuts
supplied with your fan. Secure the connector with electrical tape. Make sure
supplied with your fan. Secure the connector with electrical tape. Make sure
there are no loose wire stands or connections.
there are no loose wire stands or connections.
WARNING:
WARNING: If your house wires are different colors than referenced in this
If your house wires are different colors than referenced in this
manual, stop immediately. A professional electrician is recommended to
manual, stop immediately. A professional electrician is recommended to
determine proper wiring.
determine proper wiring.
Step 1.
Step 1. Insert the receiver into the mounting bracket, and keep flat in
Insert the receiver into the mounting bracket, and keep flat in
opposition of ceiling.Cut off excess fixture wires approximately 6 to 9 inches
opposition of ceiling.Cut off excess fixture wires approximately 6 to 9 inches
above top of the downrod assembly. Strip insulation off 1/2 in. from the end of
above top of the downrod assembly. Strip insulation off 1/2 in. from the end of
each fixture wire. (Fig. 13)
each fixture wire. (Fig. 13)
Step 2.
Step 2. Motor to Receiver Electrical Connections: Connect the BLACK
Motor to Receiver Electrical Connections: Connect the BLACK
wire from the fan to BLACK wire marked "TO MOTOR L" from the receiver.
wire from the fan to BLACK wire marked "TO MOTOR L" from the receiver.
Connect the WHITE wire from the fan to the WHITE wire marked "TO MOTOR
Connect the WHITE wire from the fan to the WHITE wire marked "TO MOTOR
N" from the receiver. Connect the BLUE wire from the fan to the BLUE wire
N" from the receiver. Connect the BLUE wire from the fan to the BLUE wire
marked "FOR LIGHT" from the receiver. Secure all the wire connections with
marked "FOR LIGHT" from the receiver. Secure all the wire connections with
the plastic wire connectors provided. (Fig. 14)
the plastic wire connectors provided. (Fig. 14)
Step 3.
Step 3. Remote Receiver to Outlet Box Electrical Connections: Connect the
Remote Receiver to Outlet Box Electrical Connections: Connect the
BLACK (hot) wire from the ceiling to the BLACK wire marked "AC IN L" from
BLACK (hot) wire from the ceiling to the BLACK wire marked "AC IN L" from
the receiver. Connect the WHITE (Neutral) wire from the ceiling to the WHITE
the receiver. Connect the WHITE (Neutral) wire from the ceiling to the WHITE
wire marked "AC IN N" from the receiver. Secure all the wire connections with
wire marked "AC IN N" from the receiver. Secure all the wire connections with
the plastic wire connectors provided. (Fig. 14)
the plastic wire connectors provided. (Fig. 14)
Fig. 13a
Fig. 13b
Fig. 14
Receiver
Mounting Bracket
Green or bare copper (ground)
AC IN N(White)
AC IN L(Black)
Black ("AC IN L")
White("AC IN N")
White("TO MOTOR N")
Ground wire
Ground wire
White (Neutral)
Receiver
Black ("TO MOTOR L")
Black (motor)
Blue(FOR LIGHT)
Blue(for light)
6 to 9 in.
