11
12
ASSEMBLY INSTRUCTIONS (FINAL INSTALLATION STEPS)
NOTE: COMPLETE EITHER “PLUG-IN MOUNTING” OR “DIRECT WIRE MOUNTING” ASSEMBLY
INSTRUCTIONS BEFORE FOLLOWING THESE FINAL INSTALLATION STEPS.
1c. Slip glass shade (D) over socket (C) and
raise up completely into socket base cup
(I), making sure glass shade (D) is fully
seated in socket base cup (I).
While holding glass shade (D) in place,
carefully tighten three (3) thumbscrews
(H) through socket base cup (I) and
against glass shade (D) below the upper
rim of glass shade(D), so that thumb
screws (H) each press against glass
shade (D) to secure glass shade (D) in
place. DO NOT OVERTIGHTEN
THUMBSCREWS.
1c
2c. Insert 60-watt max. medium base bulb or
LED equivalent (not included) into socket (C).
2c
13
D
I
H
C
C
