11
12
ASSEMBLY INSTRUCTIONS (FINAL INSTALLATION STEPS)
NOTE: COMPLETE EITHER “PLUG-IN MOUNTING” OR “DIRECT WIRE MOUNTING” ASSEMBLY
INSTRUCTIONS BEFORE FOLLOWING THESE FINAL INSTALLATION STEPS.
1c. Carefully slip shade (D) up over socket
cup (K), aligning holes in shade (D) with
holes in socket cup (K). While holding
shade (D) in place, screw three (3) small
thumbscrews (H) into aligned holes and
carefully tighten to secure shade (D) to
socket cup (K).
1c
13
2c. Adjust shade (D) by loosening shade
adjustment thumbscrew (I) and arm
adjustment thumbscrew (J) at fixture
joints (finger turn slightly
counterclockwise), adjusting to desired
position, and then re-tightening shade
adjustment thumbscrew (I) and arm
adjustment thumbscrew (J) at fixture
joints (finger turn slightly clockwise).
WARNING: DO NOT COMPLETELY
REMOVE THUMBSCREWS FROM
FIXTURE JOINTS.
2c
K
H
D
I
J
D
