*IF EQUIPPED
7
ALWAYS CHECK THE OWNER’S MANUAL FOR COMPLETE OPERATING INFORMATION AND SAFETY WARNINGS
INSTRUMENT CLUSTER
Service Interval Mode
To enter Service Interval Mode, press the Mode button
A
and cycle to Service Interval Mode Then press
the OK button
B
to enter System will display tire
pressure status, number of miles remaining until next
service is due, as well as the type of service due
When service is required, the following will be
displayed:
Service Required.
To reset the Service Interval Mode system, press and
hold the OK button
B
for more than 1 second
To turn
Service In
OFF, go to User Settings
Service Interval Setting
When in the
Service In
screen, set the service
interval in User Settings mode:
•
Press the Mode button
A
to cycle to User Settings
•
Scroll down to Service Interval and select
•
If Service Interval is not
checked, press the OK
button
B
to turn ON
•
Press the OK button
B
up/down to select/change
the interval setting
•
Press the OK button
B
to select the interval
User Settings Modes:
Driving Assistance*
• Smart Cruise Control (SCC) Reaction*
• Driver Attention Warning (DAW)*
• Lane Safety*
• Forward Collision-Avoidance
Assist (FCA)*
• Forward Collision Warning (FCW)*
• Blind-Spot Collision Warning Timing*
• Rear Cross-Traffic Collision Warning
(RCCW)
Door/Liftgate
• Automatically Lock
• Automatically Unlock
• Two Press Unlock*
• Horn Feedback*
• Smart Liftgate*
Lights
• One-Touch Turn Signal
• Headlight Delay
• Welcome Light*
Sound
• Parking Distance Warning Volume*
• Welcome Sound*
Convenience
• Seat East Access*
• Welcome Mirror/Light*
• Wiper/Light Display*
• Gear Position Pop-up*
• Icy Road Warning*
Service Interval
• Enable Service Interval
• Adjust Interval
• Reset
Other Features
• Fuel Economy Auto Reset
• Fuel Economy Unit
• Temperature Unit
• Tire Pressure Unit*
Language
• Choose the language
Reset
• All menus in the User
Settings mode are reset back
to factory settings, except
language and service interval
Service in
Off
Service Required
Service in
1500
mi
30
days
-200
mi
-6
days
To view these videos
on your mobile device,
snap these QR codes or
visit the listed website
Refer to page 2 for more
information
LCD Display Video
LCD Display:
Maintenance Video
www.youtube.com/KiaFeatureVideos
QR CODES
User Settings Mode
To enter the User Settings mode in the LCD Instrument Cluster Modes,
press the Mode button
A
when the vehicle is at a standstill and
with the Engine Start/Stop button in the ON position and select User
Settings by pressing the Move/Reset (OK) button
B
up/down
You can navigate the selections on the display by pressing the OK
button
B
Select the item by pressing the OK button
B
(Images are for illustration
purposes only and may vary)
Содержание Spotage
Страница 1: ......