SMART CRUISE CONTROL (SCC) WITH STOP & GO SYSTEM*
5
The SCC with Stop & Go system is designed to help maintain a predetermined distance
from vehicles detected ahead by automatically adjusting the driving speed as needed.
When traffic is detected, the vehicle will slow down to maintain a set distance behind
traffic without depressing the accelerator or brake pedal.
To set/adjust SCC speed:
• Press the CRUISE button
A
to turn the system ON. The CRUISE indicator will
illuminate on the instrument cluster.
• Accelerate/decelerate to the desired speed.
• Press the (SET-) button
B
down to set speed. The SET indicator light will illuminate.
The set speed and vehicle-to-vehicle distance will illuminate on the LCD screen.
• Press button
B
up or down to adjust the set speed.
To set the vehicle-to-vehicle distance
C
: Press the SCC button
D
on the steering wheel.
The image on the LCD screen
E
will change when scrolling through the settings.
To cancel SCC operation: Press the CANCEL button
F
or press the brake pedal. The LCD
screen will display a message that the SCC operation is cancelled
G
.
To turn SCC system OFF: Press the CRUISE button
A
. The CRUISE indicator on the
instrument cluster will turn OFF.
LANE KEEPING ASSIST (LKA)
5
/ LANE DEPARTURE WARNING (LDW)
5
The LKA system guides the driver to keep the vehicle within its lane and provides steering
inputs when the vehicle is about to deviate from the lane.
With the Engine Start/Stop button in the ON position, press the LKA button
A
to turn the
system ON or OFF. Once ON, the instrument cluster indicator
will illuminate white.
It will remain white when the vehicle is traveling less than 40 mph and the system does
not detect the lane markers. When the LKA system detects the lane markers and can
assist the steering, the LKA icon will illuminate green.
If the LKA detects that you are moving outside of your lane, the system may give
an audible warning and display an LDW alert on the instrument cluster. If the vehicle
continues to move outside of the lane, the LKA can provide steering inputs, trying to
prevent the vehicle from moving outside its lane.
Standard LKA is the operating mode by default when the LKA button is depressed to ON.
To switch between modes (Standard LKA, Active LKA, and LDW), go to User Settings in
the Instrument Cluster.
Active LKA provides more frequent steering inputs than standard LKA to keep the vehicle
within lanes and provide steering inputs when the vehicle is about to deviate from the
lane.
The LDW system alerts the driver when the system detects the vehicle leaving the lane.
In this mode, the system will not provide steering inputs.
All systems will operate under the following conditions:
• The vehicle exceeds approximately 40 mph.
• The vehicle is between the lane markers.
• The LKA system recognizes the lane the vehicle is traveling in.
• LKA/LDW will return to its previous state when the ignition is cycled.
HIGH BEAM ASSIST (HBA)
• HBA is designed to automatically adjust the headlight range by switching between
high and low beams based on light detected from other vehicles and road conditions.
• To enable HBA, toggle the light switch to the AUTO Light position
A
and turn
on the high beams by pushing the lever away from you. The High Beam Assist
indicator will illuminate.
Reminders
:
• HBA will operate when vehicle speed exceeds 25 mph.
FORWARD COLLISION-AVOIDANCE ASSIST-PEDESTRIAN (FCA-PED)
5
/ FORWARD COLLISION WARNING (FCW)
5
The FCA-Ped is designed to help alert the driver and, under certain conditions, apply
emergency braking, when rapidly approaching a vehicle that is slowing down, braking,
or stopped. Initially, the FCA-Ped provides FCW when it detects a potential collision with
a vehicle in front, emitting an audible warning and visual alert on the instrument cluster
A
.
The alert settings (Early, Normal, Late) can be adjusted or turned off in the user settings.
If the system detects that the collision risk has increased, the FCA-Ped can
automatically
apply the brakes to reduce your speed, potentially helping to minimize the effects of a
possible collision. FCA-Ped can be turned ON in the User Settings menu on the Instrument
Cluster display.
The FCA-Ped/FCW will become active when the:
• Engine Start/Stop button is ON.
• Vehicle is traveling more than 5 mph.
• Electronic Stability Control (ESC) is ON.
Warning:
FCA-Ped and FCW are supplemental systems. Never intentionally attempt to
activate or test the operation of the systems. Do not solely rely on the systems, and
always drive safely.
SMART-POWER LIFTGATE OPERATION*
When the Smart Key fob is on your person and you are near the back of the vehicle, within
close proximity, the hazard lights will blink and a chime will sound for about 3 seconds as
an alert that the Smart-Power Liftgate is about to open.
Then the alert system will blink and chime two additional times before opening the Smart
Power Liftgate.
The Smart-Power Liftgate feature is off by default. To enable the Smart-Power Liftgate,
go to User Settings in the LCD Instrument Cluster modes.
Power Liftgate* Opening Height Adjustment:
Adjust the liftgate height opening to suit
the user’s preference. The height setting of a fully opened liftgate can be adjusted by
the following steps:
1. Position the liftgate manually to the preferred height.
2. Press the Power Liftgate Close button
A
for more than 3 seconds.
3. A system beep will sound twice indicating the height setting has been saved.
The liftgate will then open to the set height. To change the setting again, repeat steps 1-3.
OK
60
Smart Cruise Control
Cancelled
172ft
130ft
82ft
106ft
B
D
C
F
A
E
G
Lane Keep Assist
P
A
OFF
A
Collision Warning
A
A