*IF EQUIPPED
39
ALWAYS CHECK THE OWNER’S MANUAL FOR COMPLETE OPERATING INFORMATION AND SAFETY WARNINGS
OTHER KEY FEATURES
A
B
Tire Mobility Kit Video
To view a video on your
mobile device, snap this
QR Code or visit the listed
website
Refer to page 2 for more
information
www.youtube.com/KiaFeatureVideos
D
C
QR CODE
Hood Release Lever and Latch
Opening the Hood:
1 Located on the bottom left of the driver’s panel, pull the Hood
Release Lever
A
to unlatch the Hood
2 In the front of the vehicle, lift the Hood slightly, push the secondary
Latch
B
up inside of the Hood’s center and lift the Hood
Closing the Hood:
Lower the Hood by pressing the front center of the Hood Then, press
down to securely lock in place
REMINDER:
While lowering and closing, keep hands away from under the Hood
Tire Mobility Kit
The Tire Mobility Kit may temporarily seal
certain types of tire damage
For operational information, please refer to
section 6 of your Owner’s Manual
C
Sealant Bottle
D
Compressor
•
The Tire Mobility Kit is a temporary fix
and is to be used for one tire only; the tire
should be inspected as soon as possible
•
The kit should only be used for sealing/
inflating passenger car tires; do not use
for inflating any other type of tires
•
Some damaged tires cannot be sealed
completely; do not use the kit if a tire is
damaged beyond repair
QUICK TIPS
REMINDERS:
•
The Tire Mobility Kit requires
the use of the 12V/15A/180W
Power Outlet, which is located
on the right side of the outlet/aux
port area
•
After tire is properly sealed, drive
cautiously at no more than a total
distance speed of 50 mph for no
longer than a maximum distance
of up to 120 miles