ALWAYS CHECK THE OWNER’S MANUAL FOR COMPLETE OPERATING INFORMATION AND SAFETY WARNINGS.
*IF EQUIPPED
27
ST
EER
IN
G W
HEEL
CON
TR
OL
S
STEERING WHEEL CONTROLS
AUTO
Automatic Headlights / High
Beam Assist (HBA)* position
Headlight position
Parking Light position
OFF
OFF position
OFF
OFF
Headlights & High Beams
To operate:
•
Rotate lever switch to change the Headlight function
•
Push lever to turn High Beams ON
•
Pull lever to flash Headlights / High Beams
AUTO Light position –
When the light switch is in the AUTO light position, the tail
lights and headlights will turn ON/OFF automatically, depending on the amount of
light outside the vehicle.
High Beam Assist (HBA)* –
High Beam Assist is designed to automatically adjust
the headlight range by switching between high and low beams based on light
detected from other vehicles and road conditions.
To enable HBA, toggle the light switch to the AUTO Light position and turn on the
high beams by pushing the lever away from you. The High Beam Assist indicator
will illuminate.
Turn Signals & Fog Lights
*
To operate:
•
Turn Signals - Move lever Up/Down for Right/Left
Turn Signal
•
Fog Lights - Press switch up/down to turn Fog Lights
ON/OFF
One-Touch Lane Change Signal
is activated by briefly
pressing the Turn Signal Lever up/down slightly up or down
for less than 1 second and then releasing. The lane change
signal will blink 3 times.
To change how many times the Lane Change Signal blinks
(3/5/7), go to User Settings Mode* in the LCD Instrument
Cluster modes (Type B cluster).
REMINDER:
Headlights must be ON for Fog Light operation.
REMINDERS:
•
HBA will operate when vehicle speed exceeds 25 mph
•
If the lever is pushed away from you while HBA is operational, HBA will turn off and the high beams
will be on continuously. If the lever is pulled toward you while HBA is operational, HBA will turn off
•
If the light switch is switched to the headlight position, HBA will turn off and low beams will be on continuously
•
When the warning pop-up illuminates on the instrument cluster, the HBA is not working properly. See an
authorized Kia dealer for service
•
High Beam Assist does not operate below certain speeds, or in some lighting and driving conditions. Please be
aware of your surroundings and exercise proper road etiquette when operating a vehicle using the high beams
OFF
OFF
One-Touch
Lane Change
Signal
For illustrative purposes only. Your actual display, buttons and/or features may
vary. Refer to section 4 in the Owner’s Manual for more information.
Содержание SOUL 2021
Страница 1: ......