Blind-Spot Collision-Avoidance Assist (BCA)*
12
The BCA system uses radar sensors in the rear bumper to help monitor and warn the driver in
certain situations if it detects an approaching vehicle in the driver’s blind spot area.
To turn BCA on, go to the User Settings menu in the Instrument Cluster or touch screen,
1
press the
Mode button
A
on the Steering Wheel when the vehicle is at a standstill, gear shift into Park, and
with the ignition switch or the Engine Start/Stop button* in the ON position, select User Settings.
Press the Move (OK) button
B
up/down and select Driver Assistance, Blind-Spot Safety, and then
press the OK button
B
.
To set the initial warning activation time, go to User Settings > Driver Assistance > Warning Time,
and press the OK button
B
. Select the Early/Normal or the Late option.
1st-stage alert:
When another vehicle is detected within the BCA system warning boundary,
a yellow indicator will illuminate on the outside rearview mirrors.
2nd-stage alert:
When 1st-stage alert is on and the driver activates a turn signal, a flashing
yellow indicator will illuminate on the outside rearview mirrors and the system will sound an alert.
Note:
Alert noise can be adjusted in the instrument cluster or 10.25" touch screen.*
1
Lane Keeping Assist (LKA)
12
LKA is designed to detect the lane markers on the road with a front view camera
on the windshield, and may assist the driver’s steering to potentially help keep the
vehicle in the lane. When turned on, the instrument cluster indicator
will initially
illuminate white. It will remain white when the vehicle is traveling slower than 40 mph
or when the system does not detect the lane markers. When the system detects the
lane markers and can assist the steering, the LKA icon will illuminate green.
If the LKA detects that you are moving outside of your lane, the system may give an
audible warning and display Lane Departure Warning on the instrument cluster. If
the vehicle continues to move outside of the lane, LKA may provide steering inputs,
trying to prevent the vehicle from moving outside its lane.
LKA is the operating mode by default when the Lane Safety/LKA button
A
is
depressed to ON.
There are three available modes:
•
Active LKA
— Provides more frequent steering inputs than standard LKA.
•
Lane Keeping Assist
— Guides driver to keep vehicle within lanes and provides
steering inputs when vehicle is about to deviate from the lane.
•
Lane Departure Warning
— Alerts driver when the system detects the vehicle
leaving the lane. In this mode the system will not provide steering inputs.
All systems will operate under the following conditions:
• The vehicle speed exceeds approximately 40 mph.
• LKA recognizes both sides of the lane markers the vehicle is traveling in.
• The vehicle is between the lane markers.
Lane Follow Assist (LFA)
12
LFA is designed to help ensure that the vehicle stays centered in its lane
A
by monitoring the
detected lane markings ahead and adjusting the steering. Once ON, the instrument cluster
indicator will initially illuminate white, and on some vehicles, when Smart Cruise Control (SCC)
is engaged. It will remain white when the system does not detect the lane markers. When the
system detects the lane markers and can assist the steering, the LFA icon will illuminate green
B
.
LFA will operate only when these conditions are met:
• When the SCC is on and operating.
• LFA recognizes both sides of the lane markers the vehicle is traveling in.
• The vehicle is traveling slower than 95 mph.
Reminders:
If the ignition is cycled, LFA returns to its previous state, on or off, if activated in the User Settings
menu and when combined with SCC. If using the Steering Wheel LFA button, then LFA defaults to off.
Smart Cruise Control (SCC) with Stop and Go*
12
The SCC with Stop and Go system is designed to help maintain a predetermined distance from
vehicles detected ahead by automatically adjusting the driving speed as needed. When traffic
is detected, the vehicle will automatically slow to maintain a set distance between traffic.
To set/adjust the SCC speed:
• Push the Driving Assist button
A
to turn the system ON. The CRUISE indicator will illuminate
on the instrument cluster and speed will be set to the current vehicle speed.
• Press the RES+/SET- button
B
up/down to increase/decrease the set speed.
• The SET indicator light, set speed and vehicle-to-vehicle distance will illuminate on the
instrument cluster’s LCD screen.
To set the vehicle-to-vehicle distance: Press the Vehicle Distance button
C
on the steering wheel.
The image on the LCD screen
D
will change when scrolling through the settings. Each time the
button is pressed, the vehicle-to-vehicle distance will change.
To cancel SCC operation: Press the CANCEL button
B
or press the brake pedal.
To turn the SCC system OFF: Press the Driving Assist button
A
. The CRUISE indicator on the
instrument cluster will turn OFF.
Smart Power Liftgate*
7
When the Smart Key is on your person and you are within close proximity to the back of the
vehicle, the hazard lights will blink and a chime will sound for about 3 seconds as an alert that
the Smart Power Liftgate is about to open. Then the alert system will blink and chime two
additional times before opening the Smart Power Liftgate.
The Smart Power Liftgate feature is off by default. To enable the Smart Power Liftgate, go to
User Settings in the LCD Instrument Cluster modes or the touch screen.
1
Quick Tips:
• During the Smart Power Liftgate alert, the Smart Power Liftgate can be deactivated
with the Smart Key by pressing any button on the key fob or moving away from the
detection area.
OK
MODE
A
B
C
(Distances are approximate and vary
depending on vehicle speed)
172ft
130ft
82ft
106ft
RES
OK
SET
CRUISE
CANCEL
D
OK
CRUISE
A
B
OK
CRUISE
A
B
When the front camera detects
the lane traveled in, both lanes
are illuminated
When the front camera does
not
detect the lane traveled in, the
lanes are not illuminated
LANE KEEPING ASSIST
LANE KEEPING ASSIST
LANE KEEPING ASSIST
LANE KEEPING ASSIST
HOLD
When the front camera detects the vehicle moving outside of the lane
traveled in, a vehicle crossing lane indicator will blink, either on the left
or right lane (as shown in both images above)
LANE KEEPING ASSIST
LANE KEEPING ASSIST
LANE KEEPING ASSIST
LANE KEEPING ASSIST
HOLD
(Located on Driver’s Panel to the left of the steering wheel)
LANE KEEPING ASSIST
LANE KEEPING ASSIST
LANE KEEPING ASSIST
LANE KEEPING ASSIST
HOLD
A