Kia SELTOS, Руководство пользователя, Страница: 200 / 280

Features of your vehicle
108 4
Wipers and washers
OFF position. Otherwise, wipers
may operate and ice may damage
the windscreen wiper blades.
Always remove all snow and ice
and defrost the windscreen prop
-
erly prior to operating the wind
-
screen wipers.
䳜 When tinting the windscreen, be
careful of any fluid getting into
the sensor located in the top cen
-
tre of the front windscreen. It
may damage the related parts.
Operating windscreen washers
Type A
Type B
1. Move the wiper speed control
switch to In OFF position.
2. Pull the lever gently toward you
to spray washer fluid on the
windscreen and to run the wipers
1-3 cycles. Use this function
when the windscreen is dirty. The
spray and wiper operation will
continue until you release the
lever.
If the washer does not work, check
the washer fluid level. If the fluid
level is not sufficient, you will need
to add appropriate non-abrasive
windscreen washer fluid to the
washer reservoir.
The reservoir filler neck is located in
the front of the engine compart
-
ment on the driver side.
CAUTION
To prevent possible damage to the
washer pump, do not operate the
washer when the fluid reservoir is
empty.
WARNING
Do not use the washer in freezing
temperatures without first warming
the windscreen with the defrosters;
the washer solution could freeze on
the windscreen and obscure your
vision.
OSP2049436L
OSP2049436R