SEDONA
F E A T U R E S & F U N C T I O N S G U I D E
20
*IF EQUIPPED †LEGAL DISCLAIMERS ON BACK INSIDE COVER
Smart Cruise Control (SCC) with Stop & Go System
*
†6
The Smart Cruise Control (SCC) with Stop & Go System is designed to
maintain a predetermined distance from vehicles detected ahead by
automatically adjusting the driving speed as needed When traffic is
detected, the vehicle will slow down to maintain a set distance behind
traffic without depressing the accelerator or brake pedal
With the SCC on and activated, the vehicle-to-vehicle distance set,
and the system detects a vehicle slowing or stopping, the system can
bring the vehicle to a complete stop When the vehicle ahead starts to
move forward, the SCC system re-engages If the vehicle ahead stops
for more than 3 seconds, the accelerator pedal or the RES+ button
must be pressed to start moving the vehicle
To set/adjust the SCC speed:
•
Press the CRUISE button
A
to turn system ON The CRUISE
indicator will illuminate on the instrument cluster
•
Accelerate/decelerate to the desired speed
•
Press button
B
down to set the speed The SET
indicator light will illuminate The set speed and
vehicle-to-vehicle distance will illuminate on the
LCD screen Press the RES+/SET- button
B
up/down to increase/decrease the set speed
To adjust the vehicle-to-vehicle distance setting
C
,
press the SCC button
D
on the steering wheel
Images on the LCD screen
E
and Instrument Cluster
F
will change when scrolling through the settings
To cancel SCC operation:
Press the CANCEL button
G
or press the brake pedal The LCD screen will display
a message that the SCC operation is canceled
To turn system OFF,
press the CRUISE button
A
The
CRUISE indicator on the instrument cluster will turn OFF
(Type B; buttons located on
right side of Steering Wheel)
A
B
D
G
Smart Cruise Control
(SCC) with Stop & Go
Video
QR CODE
www.youtube.com/KiaFeatureVideos
These illustrations are for
demonstration purposes only.
Actual images or buttons on
vehicle may vary.
The SCC system is a supplemental system and is not a substitute
for safe driving. It is the responsibility of the driver to always check
the speed and distance to the vehicle ahead.
F
E
To change the Cruise Control mode from SCC to
standard Cruise Control, press and hold button
A
Repeat to switch modes again (The SCC system must
not be activated to change modes)
For the SCC System to operate:
•
When no vehicle is in front, you must be traveling at
a minimum speed of 20 mph
•
When following a vehicle, there is no minimum speed
requirement
When following a vehicle, the system will automatically
adjust your cruise speed based on the vehicle detected
in front It may even bring the vehicle to a complete
stop if necessary
QUICK TIPS
REMINDERS:
•
Cruise Control button must be ON in order to turn SCC
ON/OFF
•
The SCC system is turned ON again when the ignition is
cycled off, then on again The speed setting will need to be
reset when ignition is cycled
•
When following a vehicle, the system will automatically
adjust your cruise speed based on the vehicle detected
in front
•
If the SCC system is left on, it can be activated
inadvertently Keep the system off when not in use to avoid
setting a speed that the driver is not aware of
•
In standard Cruise Control, the driver needs to manually
assess the distance from other vehicles as the system will
not apply brakes to slow down automatically in order to
turn SCC ON/OFF
•
The SCC is also canceled when the driver’s door is
opened, gear shift is changed out of D (Drive) and various
other conditions See Owner’s Manual for other conditions
REMINDER:
Distances are
approximate, based on 56 mph
vehicle speed The SCC vehicle-
to-vehicle distance increments
are based on vehicle speed
STEERING WHEEL CONTROLS
172ft
130ft
82ft
106ft
C
Содержание SEDONA 2020
Страница 1: ......
Страница 52: ...SEDONA F E A T U R E S F U N C T I O N S G U I D E 50 NOTES...
Страница 53: ...51 NOTES...
Страница 54: ...SEDONA F E A T U R E S F U N C T I O N S G U I D E 52 NOTES...