Kia Rio 2007 Скачать руководство пользователя страница 79

Страница: 79 / 256

Knowing your vehicle

Closing the hood

1. Before closing the hood, check the fol-

lowing:

• All filler caps in engine compartment

must be correctly installed.

• Gloves, rags or any other com-

bustible material must be removed
from the engine compartment.

2. Secure the support rod in its clip.
3. Lower the hood to about 12 inches (30

cm) height and then let it drop to prop-
erly lock in place.

Make sure the hood is properly locked
before driving.

FUEL FILLER LID

1. Stop the engine.
2. To open the fuel filler lid, pull the

release lever.

CAUTION

- Hood

• Before closing the hood, make

sure that all engine parts and
tools have been removed from
the engine area and that no one’s
hands are near the hood opening.

• Do not leave gloves, rags or any

other combustible material in the
engine compartment. Doing so
may cause a heat-induced fire.

1JBA3082

1JBA3207

4 Door

5 Door

CAUTION

To avoid injury from sharp edges, it
is recommended that protective
gloves be worn if there is a need to
open the fuel filler door manually.

Содержание Rio 2007

































































































































































































































































Результаты поиска

Содержание Rio 2007

Отзывы:

Похожие инструкции для Rio 2007

Бренды по названию

Популярные бренды

Kia Rio 2007, Руководство пользователя

Результаты поиска

Содержание Rio 2007

Отзывы:

Похожие инструкции для Rio 2007

Бренды по названию

Популярные бренды