Kia niro plug-in hybrid 2018, Руководство по функциям и возможностям, Страница: 29 / 54

27
*IF EQUIPPED ALWAYS CHECK THE OWNER’S MANUAL FOR COMPLETE OPERATING INFORMATION AND SAFETY WARNINGS .
(Type B shown)
(Distances are approximate and vary
depending on vehicle speed)
(Actual screen on vehicle may vary)
STEERING WHEEL CONTROLS
Smart Cruise Control
Video
To view a video on your
mobile device, snap this
QR Code or visit the listed
website .
Refer to page 2 for more
information .
www.youtube.com/KiaFeatureVideos
QR CODE
Smart Cruise Control
canceled
F
E
H
A
B
D
172ft 130ft
82ft
106ft
C
G
Smart Cruise Control (SCC)
The Smart Cruise Control (SCC) system allows you to set the vehicle to maintain a speed
so long as it is not limited by traffic . When traffic is encountered, the vehicle will be slowed
to maintain a set distance behind traffic without depressing the accelerator or brake pedal .
To set/adjust the SCC speed:
• Push the CRUISE button A to turn system ON . The CRUISE indicator will illuminate
on the instrument cluster
•
Accelerate/decelerate to the desired speed
• Move the SCC lever B to set or adjust speed
To adjust the vehicle-to-vehicle distance setting C , press the SCC button D on the steering
wheel . The images on the LCD screen E and the Instrument Cluster F will change when scrolling
through the settings . Each time the button is pressed, the vehicle-to-vehicle distance changes .
To cancel SCC operation: Press the CANCEL button G . The LCD screen will display a
message that the SCC operation is canceled H .
To turn SCC system OFF: Press the CRUISE button A . The CRUISE indicator on the
instrument cluster will turn OFF .
• To change the Cruise Control mode from SCC to standard
Cruise Control, press and hold button
D
. Repeat to switch
modes again (The SCC system must not be activated to
change modes) .
• For the SCC System to operate, you must be traveling at a
minimum speed of 20 mph, when no vehicle is in front .
• The Smart Cruise Control System (SCC) is deactivated
when driving under the speed of 6 .0 mph
• When following a vehicle, the system will automatically
adjust your cruise speed based on the vehicle in front .
QUICK TIPS
REMINDERS:
•
In standard Cruise Control, the driver needs to manually assess the
distance from other vehicles as the system will not apply brakes to
slow down automatically in order to turn SCC ON/OFF
•
SCC system is activated when ignition is turned on . Speed will need to
be reset when ignition is cycled on
•
The distance settings are approximations and may vary depending on
factory settings at the time . See owner’s manual for more information
•
The SCC is also canceled when the driver’s door is opened, gear shift
is changed out of D (Drive) and various other conditions . See owner’s
manual for other conditions .