Kia Niro Hybrid, Руководство пользователя, Страница: 79 / 646

Seatback angle (2)
Push the control switch ýorward or
backward to move the seatback to the
desired anþle. Release the switch once
the seat reaches the desired position.
Seat height (if equipped) (3)
Pull the ýront portion oý the control
switch up to raise or press down to
lower the ýront part oý the seat cush‐
ion. Pull the rear portion oý the control
switch up to raise or press down to
lower the rear part oý the seat cushion.
Release the switch once the seat rea‐
ches the desired position.
Lumbar support (for driver’s seat,
if equipped) (4)
The lumbar support can be adjusted by
pressinþ the lumbar support switch on
the side oý the seat.
1. Press the ýront portion oý the
switch to increase support, or the
rear portion oý the switch, to de‐
crease support.
2. Release the switch once it reaches
the desired position.
Headrest (for front seat)
The driver's and ýront passenþer's
seats are equipped with a headrest ýor
the occupant's saýety and comýort.
The headrest not only provides comýort
ýor the driver and ýront passenþer, but
also helps protect the head and neck in
the event oý a collision.
WARNING
• For maximum effectiveness in
case of an accident, the headrest
should be adjusted so the middle
of the headrest is at the same
height of the center of gravity of
an occupant's head. Generally, the
center of gravity of most people's
head is similar with the height of
the top of their eyes. Also, adjust
the headrest as close to your head
as possible. For this reason, the
use of a cushion that holds the
body away from the seatback is
not recommended.
• Do not operate the vehicle with
the headrests removed. Severe in‐
jury to the occupants may occur in
the event of an accident. Headr‐
ests may provide protection
against neck injuries when proper‐
ly adjusted.
• Do not adjust the headrest posi‐
tion of the driver’s seat while the
vehicle is in motion.
4-07
4
Saýety ýeatur
es oý your v
ehicle