Kia niro ev 2020, Руководство по функциям и возможностям, Страница: 32 / 54

B
C
A
Tilt/Telescoping Steering Wheel
†22
To adjust the Steering Wheel, push the lock-release lever A down
and adjust the desired angle B and distance C .
When finished, pull the lock-release lever A up to lock Steering
Wheel in place .
It may be helpful to pull/push bottom of Steering Wheel towards/away from
you to adjust desired distance .
QUICK TIP
Do not adjust the steering
wheel while driving as this
may cause you to lose
control of the vehicle.
30 NIRO EV
F E A T U R E S & F U N C T I O N S G U I D E
*IF EQUIPPED †LEGAL DISCLAIMERS ON BACK INSIDE COVER
STEERING WHEEL CONTROLS
Smart Cruise Control (SCC) with Stop & Go *
†7,20
(Continued)
• To change the Cruise Control mode from SCC to standard Cruise Control, press and
hold the SCC button
D
(previous page) . Repeat to switch modes again (the SCC
system must not be activated to change modes)
• For the SCC system to operate:
– When no vehicle is in front, you must be traveling at a minimum speed of 20 mph
– When following a vehicle, you must be traveling at a minimum speed of 6 mph
• When following a vehicle, the system is able to automatically adjust your cruise speed
based on the vehicle detected in front . If the vehicle detected remains at a standstill for
more than 3 seconds, the system will disable
QUICK TIPS
REMINDERS:
•
Cruise Control button must be ON in order to turn SCC ON/OFF
•
The SCC can operate when the vehicle is driving faster than 6 mph
•
SCC is activated when ignition is turned on . Speed will need to be reset when ignition is cycled on
•
The SCC system is turned ON again when the ignition is cycled off, then on again . The speed
setting will need to be reset when ignition is cycled
•
SCC is also canceled when the driver’s door is opened, gear shift is changed out of D (Drive), EPB
is activated and various other conditions . See Owner’s Manual for other conditions
•
In standard Cruise Control, the driver needs to manually assess the distance from other vehicles as
the system will not automatically apply brakes
•
If the SCC system is left on, it can be activated inadvertently . Keep the system off when not in use
to avoid setting a speed that the driver is not aware of
•
When following a vehicle, the system will automatically adjust your cruise speed based on the
vehicle detected in front