Kia LAN2100EKXM, Руководство по обслуживанию

Страница: 30 / 31

8-2
Map matching
As mentioned, the GPS systems used by this Navigation System are susceptible to certain errors.
Their calculations may on occasion place you to a location on the map where no road exists. In this situation,
the processing system understands that vehicles travel only on roads, and is able to correct your position by
adjusting it to a nearby road. This is called map matching.
How to update the navigation map and software
To update the navigation map and software, visit the site
(http://www.navigation.com/kia).
With map matching. With no map matching.
Symptom Cause Correction
Power does not turn on.
The unit does not operate. The ignition switch is NOT turned ON. Turn the ignition switch to ON.
The ignition switch is NOT set to ACC. Set the ignition switch to ACC.
The power of the unit is turned OFF. Turn the unit on by pressing
on the control panel.
Noise and other factors are causing
the built-in microprocessor to operate
incorrectly. Turn the unit off and then on.
The unit does not operate normally. You can reset the unit. Press the
RESET hole with a sharp object.
Playback is not possible. The disc is dirty. Clean disc.
The loaded disc is a type this unit
cannot play. Check the type of the disc.
The disc is inserted upside down. Insert the disc with the label
upward.
The files on the disc are an irregular
file format. Check the file format.
There is no sound. The volume level is low. Adjust the volume.
The mute is on. Turn the mute off.