Kia K102R, Инструкция по эксплуатации

Страница: 8 / 40

BLUETOOTH
– Bluetooth Function
1.1.2. Setting Your Bluetooth Device to Pairing Mode
1) Browse your mobile phone or music player menu to find the SETTINGS or
CONNECTIVITY section to find the Bluetooth connection section.
2) Find the command that may be called Search for Bluetooth device or Discovery
mode so that your Bluetooth device can locate all the Bluetooth devices within range
that may be connected.
3) After the search is complete, KIA should appear on your mobile phone or music player
screen.
4) Select CONNECT or SELECT on your mobile phone or music player.
5) The mobile phone or music player should now prompt you top enter a PIN code.
Enter 0000 into your Bluetooth device and select OK .
6) The mobile phone or music player should confirm that it has established a new paired
connection with the KIA Bluetooth radio.
7) The pairing process is now complete.
8) If the pairing failed, FAIL appears on the KIA Bluetooth radio display.
Note:
a. As each mobile phone or music player brand and model has a different menu
structure and control names, you may need to refer to the user manual of your
Bluetooth device for the correct procedure to connect to another Bluetooth device.
b. Once the Bluetooth pairing is complete, automatic connection between mobile phone
and the KIA Bluetooth radio is possible whenever the car ignition switch is switched
on. The mobile phone must be set to automatically connect to the KIA Bluetooth
radio to allow this automatic connection.
c. The KIA Bluetooth radio will give connection priority to the last connected mobile
phone.
d. It is recommended that all other Bluetooth devices other than mobile phones are
switched off during the registration or pairing process.
e. A passcode may not be required on some mobile phones.
1.2. Disconnecting a Bluetooth Device
If you need to disconnect your Bluetooth mobile phone or music player with the KIA
Bluetooth radio, follow the steps below.
1) Press button
⑳
, to select BLUETOOTH mode.
2) BLUETOOTH appears on the display.
3) Press knob ② , REG PHONE appears on the display.
4) Press knob
②
again to disconnect the currently connected mobile phone or music
player from the KIA Bluetooth radio.
5) When the Bluetooth connection is lost, Bluetooth logo disappears and the previously
connected device name (e.g. Samsung or Nokia) and LOST appear on the display.
6) If BEEP ON is selected (see page 21), three beep sounds are heard when the current
Bluetooth device connection is lost or disconnected.
8