3. Disable Direct Hazards / Safety Regulations
The final step in the initial response process, conducted after immobilizing the vehicle, is to
disable the vehicle, its SRS components and the high voltage electrical system. To prevent
current flow through the system, use one of the following procedures to disable the vehicle.
3.1 Disabling the System
– Smart Key System and “POWER”
START/STOP Button
1. Confirm the status of the READY light on
the instrument panel. If the
READY
light is illuminated, the vehicle is ON.
“POWER” START/STOP
Button
a)
If
the
READY
light
is
NOT
illuminated, the vehicle is off. Do not
push
the
“POWER” START/STOP
button because the vehicle may start
(go into READY mode).
b) To turn OFF the system, put the vehicle in
‘P' (Park) position, and press the POWER
button.
9
Case I
Power
Off
12V battery
disconnection
High voltage
shut off
Case II*
12V battery
disconnection
Fuse removal
(Fuse box)
High voltage
shut off
OPTIMA PHEV
*In case of emergency
