Kia Forte 2021, Руководство по функциям и возможностям

Страница: 18 / 54

16 FORTE
F E A T U R E S & F U N C T I O N S G U I D E
*IF EQUIPPED
Headlights & High Beams
To operate:
•
Rotate switch to change the Headlight function
•
Push lever to turn High Beams ON
•
Pull lever to flash Headlights/High Beams
AUTO Light Position* — When the light switch is in the
AUTO Light position, the tail lights and headlights will turn
ON/OFF automatically depending on the amount of light
outside the vehicle.
Daytime Running Lights (DRL)* — DRL may help others
to see the front of your vehicle during the day. The lights will be on
automatically when the ignition or Engine Start/Stop button is ON
and the headlight switch is in the AUTO position, unless one of the
following occurs:
• Headlights are on
• Parking brake is applied
• Engine is turned off
• Switch is in the DRL OFF position
High Beam Assist (HBA)*
— High Beam Assist is designed to automatically adjust the headlight
range by switching between high and low beams based on light detected from other vehicles and
road conditions. To enable HBA, toggle the light switch to the AUTO Light position and turn on the
high beams by pushing the lever away from you. The High Beam Assist indicator will illuminate.
REMINDERS:
• High Beam Assist does not operate below certain speeds, or in some lighting and driving conditions. Please be aware of
your surroundings and exercise proper road etiquette when operating a vehicle using the high beams
• HBA will operate when vehicle speed exceeds 25 mph
• If the lever is pushed away from you while HBA is operational, HBA will turn off and the high beams will be on continuously.
If the lever is pulled toward you while HBA is operational, HBA will turn off
• If the light switch is switched to the headlight position, HBA will turn off and low beams will be on continuously
For illustrative purposes only. Your actual display, buttons and/or features may vary. Refer to section 4 in the Owner’s Manual
for more information.
AUTO
Auto Light / DRL* /
High Beam Assist*
Headlight position
Parking light position
OFF
OFF position
OFF
OFF
AUTO
Turn Signals & Fog Lights *
To operate:
•
Turn Signals - Move lever Up/Down for Right/
Left Turn Signal
•
Slightly move lever up/down to activate One-
Touch Lane Change Signal
•
Fog Lights - Press switch A up/down to turn
Fog Lights ON/OFF
REMINDER: Headlights must be ON for Fog Light operation.
One-Touch Lane Change Signal
is activated by
briefly pressing the Turn Signal lever up/down
slightly for less than 1 second and then releasing.
The lane change signal will blink 3-7 times.
To change how many times the Lane Change Signal
blinks (3/5/7), go to User Settings Mode in the LCD
Instrument Cluster and select Lights, then One-
Touch Turn Signal.
Refer to section 4 in the Owner’s Manual for more information.
For illustrative purposes only. Your actual display, buttons and/or
features may vary.
One-Touch
Lane Change
Front Fog
Light Control
.
A
ST
EER
IN
G W
HEEL
CON
TR
OL
S
STEERING WHEEL CONTROLS