Kia Cerato Скачать руководство пользователя страница 501 | Manualshive

Страница: 501 / 655

Kia Cerato Скачать руководство пользователя страница 501

What to do in an emergency

6

6

Jump starting procedure

1. Make sure the booster battery is

12-volt and that its negative termi-
nal is grounded.

2. If the booster battery is in another

vehicle, do not allow the vehicles
come in contact.

3. Turn off all unnecessary electrical

loads.

4. Connect the jumper cables in the

exact sequence shown in the illus-
tration. First connect one end of a
jumper cable to the positive terminal
of the discharged battery (1), then
connect the other end to the positive
terminal on the booster battery (2).
Proceed to connect one end of the
other jumper cable to the negative
terminal of the booster battery (3),
then the other end to a solid, sta-
tionary, metallic point (for example,
the engine lifting bracket) away
from the battery (4). Do not con-
nect it to or near any part that
moves when the engine is cranked.
Do not allow the jumper cables to
contact anything except the cor-
rect battery terminals or the cor-
rect ground. Do not lean over the
battery when making connections.

5. Start the engine of the vehicle with

the booster battery and let it run at
2,000 rpm, then start the engine
of the vehicle with the discharged
battery.

If the cause of your battery discharg-
ing is not apparent, we recommend
that the system be checked by an
authorised Kia dealer.

Push-starting

Your manual transaxle-equipped
vehicle should not be push-started
because it might damage the emis-
sion control system.
If your vehicle has an automatic
transaxle / dual clutch transmission,
be sure the shift lever is in N
(Neutral) or P (Park) and the emer-
gency brake is set.

WARNING

Never tow a vehicle to start it
because the sudden surge for-
ward when the engine starts
could cause a collision with the
tow vehicle.

CAUTION

- Battery

cables

Do not connect the jumper cable
from the negative terminal of the
booster battery to the negative
terminal of the discharged battery.
This can cause the discharged
battery to overheat and crack,
releasing battery acid.
Make sure to connect one end of
the jumper cable to the negative
terminal of the booster battery,
and the other end to a metallic
point, far away from the battery.

«
...
499
500
501
502
503
...
»

Содержание Cerato
















































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов