Kia Cadenza 2018, Советы по функциям автомобиля, Страница: 5 / 8

HEAD-UP DISPLAY (HUD)*
WIND BUFFETING
LANE DEPARTURE WARNING SYSTEM (LDWS)*
3
If an unintentional lane departure is detected, LDWS*
3
may issue a warning on the LCD screen.
With the Engine Start/Stop button in the ON position, press the LDWS
3
button to turn
the system ON. The LDWS
3
icon in the instrument cluster will illuminate green. To cancel,
press the button again.
When the vehicle exceeds approximately 40 mph and the LDWS
3
system recognizes the lane
the vehicle is traveling in, the lane indicators will both be solid white. If the vehicle begins to drift,
the lane indicator changes from solid white to solid yellow in the instrument cluster with an
audible alert.
Tighten the cap until it clicks one time, otherwise the Check Engine Light may illuminate.
The Fuel Filler Door Release button is located on the driver’s side lower dash next to the
trunk release.
The Drive Mode Integrated Control System* and the Smart Mode automatically select the
optimum driving mode among Comfort, Eco, Sport and Smart modes by detecting and
learning the driver’s driving style, such as the use of the accelerator pedal and the steering
wheel, in real time. To cycle through the different Drive Modes
A
, press the DRIVE MODE
button B . The Instrument Cluster will display the current mode selected C .
In many vehicles, when a rear window is lowered and the front window(s) are in the closed position, air flowing past the
open window(s) induces pressure oscillations, or pulsations, which may be uncomfortable. When opening the rear window(s),
always remember to also open the front window(s), slightly, to relieve the pressure oscillations inside the vehicle.
CHECK ENGINE LIGHT FROM FUEL CAP
DRIVE MODE INTEGRATED CONTROL SYSTEM*
(Button panel located left
of Steering Wheel)
(Button located left of
Steering Wheel)
(Buttons located left of Steering Wheel)
The HUD displays:
• Turn By Turn (TBT) navigation information
• Road signs
• Speedometer
• Cruise setting speed
• Advanced Smart Cruise Control (ASCC)
information*
• Blind Spot Detection (BSD) system information*
• Warning lights (low fuel, BSD)
• AV Mode information
Head-Up Display (HUD) Display Settings
Drivers can adjust the HUD settings from the LCD
Instrument Cluster modes in User Settings. HUD
settings include:
• Display Height: Adjust the height of the HUD
image on the windshield glass
• Rotation: Adjust the degree of HUD rotation
• Brightness: Adjust the intensity of the HUD
brightness
• Contents Select: Activate or deactivate HUD
content (TBT, ASCC, LDWS, BSD)
• Speedometer Size: Choose the size of the HUD
speedometer (Small, Medium, Large)
• Speedometer Color: Choose the color of the HUD
speedometer (White, Amber, Green)
The Head-Up Display (HUD) is a transparent display that projects a snippet of information from the instrument cluster
and navigation system onto the windshield glass. Drivers can turn the HUD display on or off in User Settings.
1
2
3
4
x1000 rpm
5
6
7 40
60
80 180
200
220
100
120
km/h
MPH
140
160
20
40
60
80
100
120
140
ECO
SPORT
(Button located below Gear Shift)
Warning: Failure to pay attention to travel conditions and vehicle operation could result in loss of vehicle control.
Always drive safely and use caution.
(Button panel
located left of
Steering Wheel)
A
(Buttons located below Gear Shift)
Comfort
ECO SMART
Sport
DRIVE
MODE
Comfort
ECO SMART
Sport
DRIVE
MODE
A C
B