manualshive.com logo in svg

Kia 2007 Magentis, Руководство пользователя, Страница: 279 / 289

Поделиться
Скачать
Kia 2007 Magentis Скачать руководство пользователя страница 279

Maintenance

38

7

Aluminum wheel maintenance  

The aluminum wheels are coated with a
clear protective finish.
• Do not use any abrasive cleaner, pol-

ishing compound, solvent, or wire
brushes on aluminum wheels. They
may scratch or damage the finish.

• Use only a mild soap or neutral deter-

gent, and rinse thoroughly with water.
Also, be sure to clean the wheels after
driving on salted roads. This helps pre-
vent corrosion.

• Avoid washing the wheels with high-

speed car wash brushes.

• Do not use any acid detergent. It may

damage and corrode the aluminum
wheels coated with a clear protective
finish.

INTERIOR CARE 

Interior general precautions 

Prevent caustic solutions such as per-
fume and cosmetic oil from contacting
the dashboard because they may cause
damage or discoloration. If they do con-
tact the dashboard, wipe them off imme-
diately. See the instructions that follow for
the proper way to clean vinyl.

✽

✽

NOTICE

Never allow water or other liquids to
come in contact with electrical/electron-
ic components inside the vehicle as this
may damage them.

Cleaning the upholstery and inte-
rior trim 

Vinyl 

Remove dust and loose dirt from vinyl
with a whisk broom or vacuum cleaner.
Clean vinyl surfaces with a vinyl cleaner.

Fabric 

Remove dust and loose dirt from fabric
with a whisk broom or vacuum cleaner.
Clean with a mild soap solution recom-
mended for upholstery or carpets.
Remove fresh spots immediately with a
fabric spot cleaner. If fresh spots do not
receive immediate attention, the fabric
can be stained and its color can be
affected. Also, its fire-resistant properties
can be reduced if the material is not
properly maintained.

✽

✽

NOTICE

Using anything but recommended
cleaners and procedures may affect the
fabric’s appearance and fire-resistant
properties.

Ofrecido por www.electromanuales.com

Содержание 2007 Magentis


































































































































































































































































































Отзывы:

Нет отзывов