2
Assemble units as described herein only. To do otherwise
may result in instability. All screws, nuts and bolts must be
tightened securely and must be checked periodically after
assembly. Failure to assemble properly, or to secure parts
may result in assembly failure and personal injury.
WorkUp
®
Fixed-Height Table - Model FX
Assembly Instructions
Base-to-Tabletop Assembly
Note:
The tabletop is pre-drilled for
installation of all components.
1. To avoid scratching the tabletop
place it with the top side down on a
soft, protective surface (Figure 2).
2. As illustrated, place the assembled
base over the pre-drilled holes on
the tabletop. Align the holes in the
tabletop with those in the spider plate
and attach to the tabletop using
#12 x 1” tapping screws in each
available hole (Figure 2).
3. Carefully invert the table to its
upright position.
Caution:
The table
is very heavy. Two or more people
are required to turn the table upright.
4. Adjust the leveling glides to level the
table.
Product Information
Maximum Load:
The allowable load
is based on the size of the worksurface
and shall be evenly distributed on the
worksurface.
Allowable Load = Perimeter x 1.5 lbs.
Example:
The allowable load for a
30” x 66” worksurface is
192 x 1.5 lbs. = 288 lbs.
Figure 2
tabletop
column
#12 x 1”
screw
spider plate
