3
Assemble units as described herein only. To do otherwise
may result in instability. All screws, nuts and bolts must be
tightened securely and must be checked periodically after
assembly. Failure to assemble properly, or to secure parts
may result in assembly failure and personal injury.
Tattoo
™
Chest, Tower & Vanity - Door Hinge Adjustment
Assembly Instructions
Door Hinge Adjustment
Note:
If doors on the storage unit
are not aligned, follow instructions
below to adjust doors until square
on the unit.
1. For
door height adjustment
of
+/-2 mm, loosen the two height
adjust screws on each hinge and
move door up or down. Re-tighten
screws (Figure 3).
2. For
door depth adjustment
, first
loosen the depth adjust screw, then
slide the key hole of the hinge to
the desired location. Re-tighten the
screw (Figure 4).
3. For
side-to-side adjustment
, turn
the side-to-side adjust screw in or
out. The screw works in conjunction
with the inner leaf of the hinge arm to
move the door back or forth without a
change in gap between the door and
the cabinet (Figure 5).
4. To
disassemble door
from cabinet,
press the button on the rear of the
hinge tail inside the unit. Pull the
door slightly forward to disengage
the hinge connection. Repeat for the
other door hinge to remove the door
from the unit (Figure 6).
Figure 3 - Door Height Adjustment
door
hinge
Figure 4 - Door Depth Adjustment
door
hinge
keyhole
of the
hinge
Figure 5 - Side-to-Side Adjustment
side-to-side
adjust
screw
door
hinge
side-to-side
adjust
screw
door
hinge
Figure 6 - Door Removal
door
hinge
button on the
rear of the
hinge tail
