4. Install Rotating Arm Assembly to
Slide Rail. Slide the rotating arm
in the slide rail. Push all the way
back until it stops (Figure 3).
5. Install Last Recessed Bumper.
Using one #6 wood screw, mount
the remaining recessed bumper
in the center hole at the front end
of the slide rail (Figure 4).
6. Assemble the SnapRack
TM
CD
Rack. Snap the two sides of the
CD rack together by lining up the
snap detail at the bottom, making
a "V" shape. Place in the wire
rack assembly (Figure 5).
7. Install the All Terrain bin
(Figure 6).
Assemble units as described herein only. To do otherwise
may result in instability. All screws, nuts and bolts must be
tightened securely and must be checked periodically after
assembly. Failure to assemble properly, or to secure parts
may result in assembly failure and injury.
P u l l O u t Wo r k s u r f a c e S t o r a g e
A s s e m b l y I n s t r u c t i o n s
Figure 4
Figure 5
Figure 6
SnapRack CD rack
recessed
bumper
snap together at the bottom
slide rail assembly
Figure 3
slide rail
rotating arm
