Assemble units as described herein only. To do otherwise
may result in instability. All screws, nuts and bolts must be
tightened securely and must be checked periodically after
assembly. Failure to assemble properly, or to secure parts
may result in assembly failure and personal injury.
1330 Bellevue Street • P.O. Box 8100 • Green Bay, WI 54308-8100 • Tel 1-800-424-2432 • www.ki.com
© 2021 Krueger International, Inc. All Rights Reserved • Code KI-AI-000087/KI/PDF/0821
Likha Casegoods - Floating Shelf
Assembly Instructions
6. Align the center mounting hole of
one plate with the appropriate pilot
hole on the wall. Start securing the
end of the appropriate steel rod
assembly by hand, into the center
mounting hole of the plate. Finishing
securing the steel rod and plate to
the wall by utilizing the flat notch on
the steel rod and a wrench. Repeat
this step to secure the remaining
mounting plates to the wall with steel
rod assemblies (Figure 3).
7. Align the two outer mounting holes
of each mounting plate with the pilot
holes on the wall and secure using
the correct type of customer supplied
wall anchor/mounting hardware
based on the wall construction
(Figure 4).
8. Align the mounting holes on the back
of the floating shelf with the steel
rods, then slide the shelf onto the
rods (Figure 5).
oating
shelf
mounting plate
with steel rod
Figure 5
steel rod
assembly
(wood stud
application)
mounting
plate
Figure 3
steel rod
at notch
steel rod
assembly
(non-stud application)
stud -or-
1
/
4
-20
toggle anchor
mounting
plate
Figure 4
steel rod
assembly
stud -or-
1
/
4
-20
toggle anchor
(non-wood
stud applications)
customer supplied
mounting hardware
based on wall
conguration
customer supplied
mounting hardware
based on wall
conguration
